Fixxon Bond Dual Protect

It is a polymer modified cement base wall and floor tile adhesive. a high strength adhesive suitable for fixing marbles, natural stone & glass mosaic on internal & external surface.

Features

Easy to use Highly polymer modified Excellent adhesion & low shrinkage Suitable for indoor outdoor and tile on tile applications

Technical Data

Bulk density	1.2kg/liter
Fresh mortar weight	1.7kg/liter
Initial set	After 3 hr
Final set	After 24 hr
color	gray
coverage	2.5 to 3 sqft/kg
storage	Store for Portland cement
Shelf life	Up to 12 months

Mixing

The powder should be added slowly to clean water and mixed thoroughly to get slump free paste like mortar.The mix proportions by volume are approximately 3 parts of powder :1 part of water ( 20 kg bag powder requires approximately 4.5 liters of water )

Fixxon Bond

This specially formulated tile adhesive is a blend of OPC, finest fillers and best quality imported additives having an apparently higher viscosity. it can be used for safe and efficient fixing of natural stone, ceramic and porcelain tiles to most common building surface including concrete, sand, bricks and existing tiled surface.

• 20KG
• 10KG
• 5KG

Features

Economically Easy to use Excellent non-slip properties Excellent adhesion low shrinkage

Technical Data

Bulk density	1.2kg/liter
Fresh mortar weight	1.7kg/liter
Initial set	After 3 hr
Final set	After 24 hr
color	gray
coverage	2.5 to 3 sqft/kg
storage	Store for Portland cement
Shelf life	Up to 12 months

Mixing

The powder should be added slowly to clean water and mixed thoroughly to get slump free paste like mortar.The mix proportions by volume are approximately 3 parts of powder :1 part of water ( 20 kg bag powder requires approximately 4.5 liters of water )

Fixxon Joint Fill

The grouting compound contains extra polymers and gives a better bonding strength for finishing tile joints compared to normal white cement. if applied properly will reduce accumulation of dust and are available in different colours to suit the tile and tile boarders.

Features

Cement based and polymer modified Interior & Exterior Easy to use Crack free

Technical Data

Fresh mortar weight	Approx.1.9 kg/
liter Initial set	After 3 hr
Final set	After 24 hr
coverage	Wall 1kg. for 100sqft. Floor 2kg. for 100sqft. (Depending on tile size/ the joints)
Storage/Shelf life	Store for Portland cement/ Up to 12 months

Direction for use

The grout should be added slowly to clean water and the mixing ratio is 3.5 volume of powder to 1 part watermix to a smooth consistency to provide a slump free easily workable mortar. The mixture is immediately ready for use and has a working tile of approximately 15- 20 minutes.

Color chart

Fixxon Epoxy Grout Filler

Fixxon epoxy is a three compound stain free grout for wall & floor.it is a excellent chemical resisitant to maximum protection against stain and bacterial attack.

• 1 Kg

Features

High chemical resistant Easy to mix and apply Long lasting Good workability Stain free Anti bacterial & Anti fungal

Technical Data

Initial set	15-20 Minutes
Final set	After 24 hr
color	As per color required
coverage	Depends on tile size and joint width
Water absorption	Nill
Shelf life	Up to 12 months

• Combine part A and B in a clean container. stir well until completely mixed
• Add part C filler powder and stir to smooth consistency